BPC-157
$49.99
BPC-157 is a synthetic 15 amino acid peptide supplied as a lyophilized powder for in-vitro laboratory research only. Every lot is tested by an independent laboratory, and its certificate of analysis is published in our COA library.
- 10 mg per vial, white lyophilized powder
- Purity by RP-HPLC, identity by LC-MS
- Latest COA published in our COA library
Certificate of Analysis
Verified- Lot
- 20260105L04BPCS10
- Purity
- 99.85%
- Tested
- 08/03/2026
Purity by RP-HPLC and identity by LC-MS, reported by an independent laboratory for every lot. COA library
What is BPC-157?
BPC-157 is a synthetic pentadecapeptide, a 15 amino acid sequence supplied as a lyophilized powder for laboratory research. The sequence corresponds to a partial sequence identified within a protein fraction isolated from gastric juice, which is where the compound designation comes from. In the laboratory it is handled as a stable, water soluble reference peptide.
BPC-157 structure and sequence
The sequence is Gly-Glu-Pro-Pro-Pro-Gly-Lys-Pro-Ala-Asp-Asp-Ala-Gly-Leu-Val, molecular weight 1419.54 Da. It is a linear peptide with a high proline content and no cysteine residues, and therefore no disulfide bonds. That makes it straightforward to characterize analytically: the chromatography is clean, the mass is unambiguous, and there is no oxidation chemistry to control for, which is why it is often used as a convenient reference peptide during method development.
Where this material appears in the literature
Published work on BPC-157 is preclinical, carried out in vitro and in animal models, and the compound also appears as an analytical subject in peptide stability and formulation studies. Revyon Technologies supplies the material for laboratory investigation of that kind and makes no claim about its effects in any living subject.
Related material in the catalog
BPC-157 is listed under regenerative and tissue repair research as a single compound, and is also offered co-lyophilized with TB-500 as BPC-157 / TB-500, and as a component of the GLOW and KLOW blends. Each is a separate product with its own lot numbers and certificates.
Analysis and certification
Every lot is analyzed by an independent laboratory before release, using RP-HPLC for purity and LC-MS for identity confirmation. The certificate of analysis is published against the lot number rather than against the product page, so each report covers one specific production lot. Browse the COA library for the latest COA for this product.
Purity specification
Lots are released against a ≥98% purity specification, determined by RP-HPLC peak area. A specification is a release threshold, not a description of every lot. The measured figure for the lot you receive is stated on its certificate of analysis and may sit above the specification.
Where a measured figure and the specification differ, the certificate is the record that applies to your material. Analytical figures relate to the lot they are published against and carry no implication of suitability for any purpose beyond laboratory research.
Research use only
Revyon Technologies supplies this material as a reference compound for in-vitro laboratory research. It is not supplied for any use in humans or animals, it is not a drug, dietary supplement, food or cosmetic, it has not been evaluated or approved by the FDA, and nothing on this page describes or implies any such use. Sale is restricted to persons aged 21 or over who are qualified researchers or who purchase on behalf of a research institution, laboratory or business.
| Size | 10 mg |
|---|
| Compound | BPC-157 |
|---|---|
| Also known as | Pentadecapeptide BPC 157 |
| Class | Synthetic peptide |
| Amino acids | 15 |
| Sequence | Gly-Glu-Pro-Pro-Pro-Gly-Lys-Pro-Ala-Asp-Asp-Ala-Gly-Leu-Val |
| Molecular formula | C62H98N16O22 |
| Molecular weight | 1419.54 Da |
| CAS number | 137525-51-0 |
| Appearance | White to off white lyophilized powder |
| Purity specification | ≥98% |
| Purity method | RP-HPLC |
| Identity method | LC-MS |
| Solubility | Soluble in sterile water and aqueous buffers for analytical preparation |
| Labeled quantity | 10 mg per vial |
| Container | Crimp-sealed glass vial with tamper-evident cap |
Characterization. Values above describe the compound as supplied. The figures for the lot you receive, including measured purity, are stated on its certificate of analysis.
How this material is tested
Two separate analyses are carried out on every lot before release, and both appear on the certificate.
- RP-HPLC, for purity. Reversed phase high performance liquid chromatography separates the material by hydrophobicity. The main peak is integrated against total peak area, and that ratio is the purity figure reported on the certificate.
- LC-MS, for identity. Liquid chromatography coupled to mass spectrometry confirms that the mass of the main peak matches the expected mass for the compound, which is what distinguishes the correct material from a closely related one.
A complete certificate carries the compound name, the lot number, the test date, the method, the measured purity and the name of the laboratory. If any of those is missing, contact us before using the material.
Storing BPC-157
As a dry lyophilized solid, BPC-157 is stable for the duration of normal transit. On arrival, move the sealed vial into freezer storage at −20°C or below, kept dry and protected from light and moisture. Returned promptly to those conditions, the dry solid is the most stable form this material takes.
Preparing stock solutions
Prepare stock solutions in sterile water or an appropriate aqueous buffer at a concentration suited to your assay, expressed in mg/mL. Allow the vial to reach room temperature before opening, add solvent down the vial wall rather than directly onto the solid, and let the material dissolve without vigorous agitation. BPC-157 dissolves readily in water at the concentrations used for analytical work.
Solutions are less stable than the lyophilized solid. Prepare close to the point of use, hold at 2 to 8°C for short periods only, and aliquot before freezing so that repeated freeze and thaw cycles are avoided.
On arrival
Check that the container is intact and sealed, and that the compound name and labeled quantity match your order. If anything does not match, or the packaging has clearly failed in transit, contact us before using the material. Report any problem within 7 days of delivery, with your order number, the lot number and photos, as set out in our shipping and returns policy.
Handling and disposal
Assess the hazards of this material before handling it and use appropriate controls and protective equipment. It has not been fully characterized toxicologically and should be treated as potentially hazardous. Anyone handling it should be trained for the work.
Dispose of unused material, containers and packaging lawfully and in line with your institution's waste procedures.
Record keeping
Record the lot number in your notes at the point of first use, alongside the date the container was opened and the concentration of any stock prepared. Certificates are published against the lot number rather than the product, so the lot number is the only reliable link between your results and the analytical data for the material that produced them. If a question arises about a result months later, that link is what keeps the work auditable.
What purity specification does this lot meet?
Every lot is released against a ≥98% purity specification by RP-HPLC. The measured figure for your lot is on its certificate of analysis and may sit above that.
Where do I find the certificate for my vial?
View the latest COA for this product in our COA library. Every lot has its own certificate, published as soon as the independent laboratory releases it.
What exactly is in the vial?
10 mg of BPC-157 as a white to off white lyophilized powder, in a crimp-sealed glass vial with a tamper-evident cap. Nothing else is added to the vial.
How should I store it when it arrives?
Move the sealed vial into a freezer at −20°C or below, kept dry and protected from light. Full laboratory storage guidance is in the Storage and handling tab.
Is this the same as the BPC-157 / TB-500 blend?
No. This vial contains BPC-157 only. The BPC-157 / TB-500 listing is a separate product with both peptides co-lyophilized in one vial, and it has its own lot numbers and certificates.
Can your team advise on dosing or use?
No. BPC-157 is supplied for in-vitro laboratory research only, and we do not give dosing, administration or protocol guidance of any kind. We are glad to help with documentation, orders and shipping. See our research use policy.
When will my order ship?
Orders placed before the daily cut-off on a business day ship the same day, with tracking, in plain outer packaging. Details are in our shipping and returns policy.
Who can purchase this material?
Qualified researchers aged 21 or over, or those purchasing on behalf of a research institution, laboratory or business. Every purchaser confirms a lawful research purpose at checkout.
